Aeroflow Turbo Drain Flanges (Many Options Available)

This selection of turbo drains options available from Aeroflow Performance will allow a large range custom plumbing application. For sufficient drainage of oil forboth bearing styles of turbochargers a -10AN or 5/8” hose is ideal. The oil outlet should follow the direction of gravity +/-45° when installed in the vehicle on level ground. It is recommended to avoid kinks or beyond 90-degree bends in the oil drain line and draining into the sump below. With heat surrounding the manifold and turbocharger a heat shield or sleeve is a great idea to prolong the life of the hose.

NOTE: To find the correct drain for you, check the bolt hole centres in your turbo for the flange. Then also make sure to check for clearance. Some turbos run a tight space and putting a -12AN or even a -10AN fitting in the gap might not work so for these cases an extended drain will be required.