Wildwood Proportioning Valve (Options Available)

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve.

Knob Style - This proportioning valve lets you fine tune the front to rear braking balance by proportionally decreasing the rear (or in some cases the front) brake line pressure. Can also be used to adjust individual front wheel braking in dirt track applications. Valves weigh only 5.2 ounces (knob), 6.1 ounces (lever), and have two .25" side mounting holes spaced 1.00" apart. Standard in and out ports are 1/8-27 NPT. Better for set and forget. Better for street/everyday use 

Lever Style - This proportioning valve has six pre-set points actuated by moving a lever allowing racers to quickly adjust brake bias during a race. The lever "clicks" into the six positions for positive adjustment. Valves weigh only 6.1 ounces (lever), and have two .25" side mounting holes spaced 1.00" apart. Inlet / outlet ports are 1/8-27 NPT. Better for adjusting on the fly. Better for racing applications. 

NOTE: If using these in a street legal car, be sure to contact your certifier to clarify where in the vehicle the proportioning valve must be located to pass certification.